| Customization: | Available |
|---|---|
| Working Pressure: | 20000 to 60000 Psi |
| Material: | Stainless Steel |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Manual tooling list
16-Manual Deburring Tool(Suitable for MP, HP and UHP Tubes.)
Manual deburring tool is composed of a blade and a handle, used to remove burrs on the inner wall of Tubes after cutting. It is applicable to 1/4", 3/8" and 9/16" MP, HP and UHP Tubes.
USUN can provide complete Ultra high pressure manual tooling set. They are applicable for processing an outward cone onto high pressure tubing end with CTA Conical tooling and processing a left-hand thread onto high pressure tubing ends with TT serial threading tooling. The complete set tooling will be Put in a black case which is easy to carry and convenient to us.
Manual tooling set application :
The Coning tool is designed for preparing to cone on the tubing ends for the 20,000 psi 60,0o psi and ultra high pressure connections.The cone degrees are approximately 57 to 59 degree .The cutter and collets are interchangeable each other .
4. CTA exploded view : ( Bellow photo is only for CTA conical tooling )
Conical tool operation guides
1 )First: Clamping fixed block of coning tool.
2Adjust the sink width is slightly larger than the length of the cutting cone, loosen the clamping gland, put the tube into the colletsinside, lock c
lamping nuts.
3 )Through the inspection hole drop in the cutting oil so that cutting edges maintain lubricating.
Right hand turn the handle, at the same time left hand rotation screw gland nut(clockwvise),at the beginning of the handle feels heavier,when the
rotary gland is screwed almost to the end, speed up the rotation speed of the handle,When handle feels relaxed, show thatcomplete the cutting,
loosen the gland, pull out the tube and check the cone if i suitable,if not ,continue above .
Manual threading tooling ( TT serial ,see bellow photo )
threading tools are specially designed forhigh pressure tubes.
They are applicable for processing a left-hand thread onto high pressure tubing ends.
The threading tool consists of tool body, handles, screws, guide bushing and die.
The die and the guide bushing can be removed and replaced.
If the die or the guide bushing is worn out, we can easily replace it with a new one.
Real picture of CTA-F tooling box
By Sea : Cheapest but longest option 18~30 days by sea delivery for mass shipment
By air : More expensive than sea delivery, But cheaper than express 5~7 days by air to airport.
By air express : Door to door service,the fastest and most expensive one, 3~5 day for DHL /Fedex /UPS/TNT express
){kind=link}