Low Cost Usun Model: Stv10-Dn200-Mpc Maximum 10 MPa Manual Control Portable Safety Valve Testing Equipment, Safety Valve Test Stand for Sale

• Customization: Available
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: 1000kg
• Model NO.: Model: STV10-DN200-MPC
• Type: Compression Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 0.5
• Load Way: Mechanical Load
• Loading Method: Static Load
• Display: Digital
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: None
• Material: Stainless Steel
• Driving Air Pressure: Compressed Air of 3-8 Bar
• Pump Type: Piston Pump
• Application: Can Be Used for Hose Pressure Testing
• Air Driven Port: G1/2′′
• Lubrication: Yes
• Name: Manual Control Air Safety Relief Valve Test Bench
• Transport Package: Carton Box Packing
• Specification: 1100x850x1700MM
• Trademark: USUN
• Origin: China
• HS Code: 8412310090
• Production Capacity: 2000 PCS Per Year

Product Description

Model :STV10-DN200-MPC Maximum 10 MPA portable pneumatic safety valve test

bench  stand or equipment for relief valve







1 .Introduction
 
The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure
 
 
release   device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.

 

2, Function

 
The safety valve test bench can do the whole pressure test, the discharge pressure test, the back seat pressure test and the pressure safety
 
performance of various relief valves.

 

 3. System composition

It consists mainly of high pressure power system, clamping device system,  and so on 

1). power system(High-pressure power source).

 
Air driven gas booster pump- GBT25 air driven gas booster pump  
 
Driven air pressure: 3-8bar;
 
Output gas/air pressure 0-100bar;
 
Test medium: air, nitrogen

 2). Clamping system:

The power of the clamping device is provided by a manual hydraulic(oil) pump to provide clamping pressure
 
,Valve diameter range:DN15-DN200 



Technical specification for GBT  seriel air gas booster pump inside of stainless steel frame

 

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure  PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
GBT25	25:1	1	10	200	3-8 bar	25XPL+3.5XPA	3/8/ 1/4	136(at PAof 8 bar )
GBT40	40:1	1	10	320	3-8 bar	40XPL+ 6XPA	3/8/ 1/4	124(at PAof 8 bar )
GBT60	10:1/60:1	1	10	480	3-8 bar	60XPL+6X PA	3/8/ 1/4	84(at PAof 8 bar )
GBT25/60	25:1/60:1	10	25	480	3-8 bar	60XPL+2.5XPA	3/8/ 1/4	80(at PAof 15 bar )
GBT100	100:1	1	10	800	3-8 bar	100XPL+10XPA	3/8/ M14*1.5	63(at PAof 8 bar )

 

  Note:  PLdriven air pressure   PA: gas inlet pressure   PB: gas outlet pressure    In order to extend the lifetime of

the pump,

           the driven air    pressure should not be higher than 8 bar

Main components included in this portable air pressure safety

valve test bench







Typical layout  drawing for clamping device 




Typical circuit of such portable safety valve test bench 



 

Factory corners