Usun Model: AB05T-B 20-40 Bar Output Air Pressure Booster Unit for Pet Blowing

• Customization: Available
• Flow Rate: Constant Pump
• Type: Piston Pump
• Model NO.: Model: AB05T-B
• Drive: Pneumatic
• Performance: High Pressure
• Material: Stainless Steel
• Pressure Ratio: 5:1
• Working Medium: Normal Air
• Drive Power: Compressed Air of 3-8 Bar
• Lubrication: Yes( Customized Lubricants )
• Noise: Less Than 75 dB
• Output Pressure: 40bar Base on 8 Bar Air Driven Pressure
• Driven Cylinder: 160mm
• Port Size: PT 1/2′′
• Outlet Pressure Formula: Po=4PA +Pi ( PA Stands for Air Driven)
• Product Name: 20-40 Bar Complete Air Pressure Booster System
• Transport Package: Carton Box Outside and Foam Inside
• Specification: CE and ISO certificate
• Trademark: Usun
• Origin: Dong Guan, China
• HS Code: 84143090
• Production Capacity: 100 PCS Per Week

Product Description

 USUN  Model :AB05T-B  5:1 ratio  20-40  Bar  160mm driven complete air pressure booster

unit  with 20L tank and high pressure regulator and air regulator 









 

General Information for high pressure air booster system
 

 Our USUN Air Amplifiers are pneumatically driven reciprocating piston/plunger pumps

 

and are ratio devices  that utilise low pressure compressed air driving a larger diameter

 

 piston (area x pressure), which is linearly connected to a smaller air piston.

 

 1.  AIR DRIVE SECTION

The air drive section consists of a light weight piston complete with seals running inside an

 

aluminum barrel. The diameter of the air piston is 100mm. When compressed air is supplied to

 

the pump the air pushes the air piston down on a compression stroke

 

 Under the control of pilot pins (poppet valve) triggered at each end of the stroke

 

Key features

1 )  stainless steel wetted materials of construction

2)  Specialised construction materials available

3) PTFE pressure seals as standard

4) Separation between gas & pneumatic seals

5) No airline lubrication required

6) 120mm stroke reduces cycle rate & increases life

7) Suitable for most hazardous areas

8) Available as a complete packaged system 

Main technical data  








Typical technical data for high pressure air booster system with 20 L tank

and high pressure regulator and air regulator 

Main technical parameter
Model	Pressure ratio	Minimum inlet pressure PI(Bar)	Maximum Outlet pressure PO(Bar)	Outlet pressure formula PO	Inlet port size	Outlet porst size	Maximum Flow rate L/min= 7 Bar
AB02	2:01	1	16	2PA	PT3/8''	PT3/8''	513@PI=7
AB03	3:01	1	24	3PA	PT3/8''	PT3/8''	420@PI=7
4AB02	2:01	1	16	2PA	PT1/2''	PT1/2''	1450@PI=7
AB04	4:01	1.7	32	4PA	PT3/8''	PT3/8''	382@PI=7
AB05T	5:01	1.7	41.5	5PA+PI	PT1/2'	PT1/2''	710@pi=7
AB07	7:01	3.4	56	7PA	PT3/8''	PT3/8''	274@PI=7
AB08T	8:01	3.4	67.4	8PA+ PI	PT3/8''	PT3/8''	482@pi=7
AB10	10:01	3.4	80	10PA	PT3/8''	PT3/8'	225@PI=7
AB15	15:01	8.1	120	15PA	PT3/8''	PT3/8'	185@PI=7

Remark 1) Maxium outlet pressure are at an air driven pressure of 8 bar or 116 PSI ,for long life using

of such pump ,we suggest that air driven pressure should be not more than 8 Bar  .


Typical application of such high pressure air  pressure booster pump with 20L

tank and high pressure regulator  and air regulator 

AIR AMPLIFIER PRODUCT COMPARISON TABLE

To select the right amplifier for your application you will need to 

know the  following parameters:

The available air pressure & volume

The desired pressure and flow rate

If you are unsure of these parameters but know a competitor brand's model number,

 use the air amplifier product comparison table below to help you choose the

 right USUN  air amplifier.
 

USUN	Haskel	Maximator	Maxpro	HII
AB04		SPLV3	DLA5-1
AB07	AA-8
AB10
AB15	AA-15		DLA15-1
AB05T	AAD-5	GPLV5	DLA5	5A-DS-5