| Customization: | Available |
|---|---|
| Max Diameter of Workpiece: | DN400 |
| Mass Scope of Workpiece: | 1000kg |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
USUN Model :STV-40-DN400-PLC Maximum DN100-DN400 safety relief valve test bench with testing pressure of 40MPA
STV-40-DN400-PLC
Description: STV - Safety Valve test bench
40- Maximum pressure 40MPa (optional)
DN400- maximum diameter 400mm
PLC - The control mode is semi automatic PLC intelligent type
The safety valve setting test bench is a new pressure testing device developed by our company with reference to GB/T 12242-2005 (Pressure Release Device, Performance Test Specification) for adjusting and testing the setting pressure of safety valves.
Function and features
The digital display control safety valve comprehensive calibration platform uses high-pressure air as a medium to test the sealing performance, popping pressure, reseating pressure, etc. of various safety valves, and assess their pressure safety performance.
Typical applications
Used for performance testing of DN15-400mm flange safety valves, threaded safety valves, full/micro opening safety valves, conventional thick and thin flange safety valves, domestic/imported safety valves, spring direct load safety valves, safety valves with power assisted functions, and safety valves with supplementary loads.
The equipment meets the requirements of national standards and is suitable for performance testing and regular inspections of safety valves by quality supervision bureaus, boiler inspection institutes, safety valve manufacturers, and safety valve users.
Technical Parameters
System composition
It mainly consists of a power system, a work piece clamping system, a data acquisition and testing system, an electrical control and output system, etc.
1. Power system:
Boosting pump GBT60: Drive pressure 5-7 bar;
Output pressure 0-400 bar;
Provide pressure for high-pressure output;
The high-pressure power configuration varies depending on the pressure range. The equipment reserves a high-pressure gas interface (such as a nitrogen cylinder or high-pressure gas source) that can directly enter the system to provide a high-pressure gas source for detection.
2. Work piece clamping system:
This clamping system uses oil cylinders of corresponding specifications for tightening, and the clamping force fully meets the pressure requirements of the safety valve;
The safety valve is connected to the high-pressure pump gas pipeline using appropriate connection fixtures according to the specifications;
The clamping of the oil cylinder ensures the sealing between the tested part and the pipeline, with two separate operations.20T/30T clamping force safety valve mounting socket (DN200/DN400 safety valve mounting socket) clamping power system: using USUN's self-made air liquid booster pump AHD64WL, the pressure is infinitely adjustable, the pressure is constant, and the clamping is smooth.
3. Data collection and testing system:
The pressure acquisition system consists of a micro controller, digital display, pressure transmitter, etc. It collects pressure values in real time, automatically controls pressure boosting and compensation, clamping pressure display, clamping protection, etc.
(1) The digital display meter automatically collects the take-off pressure and recoil pressure;
(2) Holding time, pressure, pressure difference setting;
(3) Selection of clamping force.
Operating panels introduction
Shipping
| By sea | Cheapest but longest option 18~30 days by sea delivery for mass shipment |
| By air | More expensive than sea delivery, But cheaper than express 5~7 days by air to airport. |
| By express | door to door service,the fastest and most expensive one, 3~5 day for DHL /Fedex /UPS/TNT express |
){kind=link}